we-Chinese Stone Machinery
*Ayincibilikisiwe, 100% okuqukethwe okuqinile, okuphephile, okunobungani kwemvelo futhi akunaphunga.
*Ukwelapha ngokushesha, kungafuthwa kwakhiwe kunoma iyiphi indawo egobile, emthambekeni noma eqondile, akukho ukuwohloka.
*I-coating eminyene, engenamthungo, nokuguquguquka okuhle.
*Amandla okunamathela aqinile, ukubopha ngokushesha kunsimbi, ukhonkolo, ukhuni, imicu yengilazi nezinye izinto ezingaphansi.
*Ukumelana nomthelela omuhle kakhulu, ukumelana nemihuzuko
*Ukumelana nokugqwala okuhle kakhulu nokumelana namakhemikhali kuma-asidi, i-alkali, usawoti njll.
*Ukumelana nokubhoboza okuhle kakhulu ngokumelene nezimpande zezitshalo, ukumelana nokungena nokungangeni kwamanzi
*Ukusebenza okuhle okudonsa ukushaqeka
*Ukumelana okuhle kakhulu nokuhlukahluka kwezinga lokushisa
*Ukwelashwa okusheshayo, indawo yokufaka isicelo ibuyele emsebenzini ngokushesha
*Ukuqina okuhle kakhulu kokunciphisa izindleko zokulungisa impilo yesevisi
*Nweba impilo yesevisi yesakhiwo esifuthwe
Ukumelana nezimpande ukuvikelwa okungangeni manzi kwengadi yophahla, isikwele sasemadolobheni nolunye uphahla olutshaliwe
Into | A | B |
Ukubukeka | Uketshezi oluphuzi ngokuphaphathekile | Umbala olungisekayo |
Amandla adonsela phansi athile (g/m³) | 1.13 | 1.04 |
I-Viscosity (cps)@25℃ | 810 | 670 |
Okuqukethwe okuqinile (%) | 100 | 100 |
Isilinganiso sokuxuba (isilinganiso sevolumu) | 0 | 0 |
Isikhathi sejeli(isibili)@25℃ | 1 | 1 |
Isikhathi esomile (okwesibili) | 3-5 | |
I-Theory Coverage (dft) | 1.02kg/㎡ ukujiya kwefilimu:1mm |
Izinto | Izinga lokuhlola | Umphumela |
Ukuqina (Shore A) | I-ASTM D-2240 | 89 |
Izinga lobude (%) | I-ASTM D-412 | 450 |
Amandla okuqina (Mpa) | I-ASTM D-412 | 17 |
Amandla wezinyembezi (N/km) | I-ASTM D-624 | 65 |
Ukungangenisi(0.3Mpa/30min) | HG/T 3831-2006 | okungangeneki |
Ukumelana nokugqoka (750g/500r)/mg | HG/T 3831-2006 | 4.2 |
Amandla okunamathela (Mpa) isisekelo sikakhonkolo | HG/T 3831-2006 | 3.4 |
Amandla okunamathela (Mpa) isisekelo sensimbi | HG/T 3831-2006 | 11 |
Ukuminyana (g/cm³) | I-GB/T 6750-2007 | 1.02 |
Ukukhishwa kwe-Cathodic [1.5v,(65±5)℃,48h] | HG/T 3831-2006 | ≤15mm |
Gcoba umfaniswano wengxenye B ngaphambi kokufaka, hlanganisa kahle ama-pigments afakiwe, noma ikhwalithi yomkhiqizo izothinteka.
fafaza i-polyurea ngesikhathi esifanele uma i-substrate surface i-primed.Ukuze uthole indlela yokufaka isicelo kanye nesikhathi sokuphumula se-SWD polyurea speical primer sicela ubheke enye incwajana yezinkampani ze-SWD.
Njalo gcoba i-SWD spray polyurea endaweni encane ngaphambi kokufaka isicelo esikhulu ukuze uhlole isilinganiso sokuxuba, umbala kanye nomphumela wokufutha kulungile.Ukuze uthole ukwaziswa okwengeziwe mayelana nesicelo sicela ubheke ishidi lakamuva lemiyalo lemiyalo yokusetshenziswa yochungechunge lwe-SWD spray polyurea.
Izinga lokushisa le-substrate | Yomile | Ukuhamba ngezinyawo | Eyomile eqinile |
+10 ℃ | 20s | 45 imiz | 7d |
+20 ℃ | 15s | 15 imiz | 6d |
+30 ℃ | 12s | 5 imiz | 5d |
Qaphela: isikhathi sokwelapha siyahlukahluka kuye ngesimo sendawo ikakhulukazi izinga lokushisa kanye nomswakama ohlobene.
*Kusukela ngedethi yomkhiqizi kanye nesimo sephakheji yoqobo esivaliwe:
A: Izinyanga eziyi-10
B: izinyanga eziyi-10
*Izinga lokushisa lokugcina:+5-35°C
Ukupakisha: Ingxenye A 210kg/isigubhu, ingxenye B 200kg/isigubhu
Qiniseka ukuthi iphakethe lomkhiqizo livalwe kahle
* gcina endaweni epholile nengena umoya, gwema ukuchayeka elangeni ngqo.
|
Ngokwezidingo zakho zangempela, khetha izinqubo zokuklama nezokuhlela ezinengqondo kakhulu