Loading...

I-Benchtop high speed umshini we-centrifuge we-TGL-16

Isingeniso

I-TGL-16 iyi-centrifuge enesivinini esikhulu esisebenza esiqandisini.Isivinini sayo esikhulu ngu-16500rpm.Ingakwazi ukufaka i-centrifuge tube ukusuka ku-0.2ml ukuya ku-100ml.Ngeshubhu engu-1.5ml/2.2ml, ingakwazi ukufaka i-centrifuge okungenani kumashubhu angama-48.Amashubhu asetshenziswayo ajwayelekile afana no-10ml, 15ml, 50ml angasetshenziswa kule centrifuge.Ngokuya ngomsebenzi oqandisiwe, le centrifuge isebenzisa i-centrifuge esezingeni eliphezulu engenisiwe, ukunemba kwezinga lokushisa kufinyelela ku-±1℃Isivinini esikhulu:16500rpmI-Max Centrifugal Force:21630XgAmandla Amakhulu:6*100ml(9000rpm)Ibanga Lezinga lokushisa:-20℃-40℃Ukunemba kwezinga lokushisa:±1℃Ukunemba Kwesivinini:±10rpmIsisindo:Iwaranti yeminyaka engu-55KG yemoto;Izingxenye ezishintshayo zamahhala nokuthunyelwa ngaphakathi kwewaranti

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Yini ebalulekile ku-centrifuge efrijini?Okokuqala, ukulawula izinga lokushisa.Le centrifuge isekela ukusetha izinga lokushisa phakathi -20℃no-40℃,futhi ukunemba kwezinga lokushisa ngu-±1℃.Okwesibili, imisebenzi.Le centrifuge inemisebenzi eminingi ewusizo, njengokubonwa kwerotha okuzenzakalelayo, ingagcina izinhlelo eziyi-12 futhi iguqule imingcele ngaphansi kokusebenza.

1.I-compressor engenisiwe, amafriji angenayo i-CFC.

I-compressor yekhwalithi enhle neziqandisi ezingena-CFC zisetshenziswa kule centrifuge.Singasetha izinga lokushisa phakathi -20 ℃ kanye 40 ℃.Ukunemba kwezinga lokushisa kufinyelela ku-±1℃.

2.Variable frequency motor,micro-computer control.

Kunezinhlobo ezintathu ze-motor-Brush motor, i-brushless motor kanye ne-variable frequency motor, eyokugcina iyona ehamba phambili.Izinga lokuhluleka eliphansi, i-eco-friendly, alinakekeli kanye nokusebenza okuhle.Ukusebenza kwayo kahle kwenza ukunemba kwesivinini kufinyelele ku-±10rpm.

3.Ilokhi yomnyango wokuphepha we-elekthronikhi

Uma i-centrifuge isebenza, kufanele siqiniseke ukuthi umnyango ngeke uvuleke.Sisebenzisa isikhiye somnyango we-elekthronikhi ukuze siqinisekise ukuphepha.

4.I-gyroscope yama-axis amathathu iqapha ngamandla ibhalansi yokusebenza.

Ibhalansi ibaluleke kakhulu lapho i-centrifuge ingaphansi kokusebenza, i-axis gyroscope emithathu ingaqapha ngamandla ibhalansi yokusebenza.

I-5.RCF ingasethwa ngokuqondile.

Uma sazi i-Relative Centrifugal Force ngaphambi kokusebenza, singasetha i-RCF ngokuqondile, asikho isidingo sokuguqula phakathi kwe-RPM ne-RCF.


  • Okwedlule:
  • Olandelayo:

  • Bhala umyalezo wakho lapha futhi usithumelele wona

    Unjiniyela ochwepheshe ozinikele ukukuqondisa

    Ngokwezidingo zakho zangempela, khetha izinqubo zokuklama nezokuhlela ezinengqondo kakhulu