of Chinese Stone Machinery
* Ukuqina okuphezulu, ukuxinana okuphantsi, kunye nomgangatho olungileyo, ifilimu yokugquma iqinile, ixinene, iqaqambile
* Amandla ancamathelayo abalaseleyo, ahambelana kakuhle ne-polyurethane, i-epoxy kunye nezinye izinto.
* Ukuqina okuphezulu, ukuxhathisa kakuhle komkrwelo kunye nokumelana namabala
* Ukumelana okugqwesileyo kwe-abrasion kunye nokumelana nempembelelo
* ipropathi egqwesileyo ye-anticorrosion, ukumelana ne-asidi, i-alkali, ityuwa kunye nabanye.
* Akukho tyheli, akukho tshintsho lombala, akukho pulverization, anti-ukuguga, inokumelana nemozulu entle kunye nokukhanya kunye nokugcina umbala.
* Inokusetyenziswa njengengubo engaphezulu ngqo kumphezulu wesinyithi (DTM)
* Le mveliso ihambelana nokusingqongileyo kwaye ayinazo izinyibilikisi zebenzene kunye neekhompawundi zelothe.
* ingafakwa kwiqondo lobushushu eliphantsi -10℃, ukutyabeka kuxinene, unyango olukhawulezayo.
Into | Ilungu | B icandelo |
Imbonakalo | ulwelo olumthubi olukhanyayo | Umbala unokuhlengahlengiswa |
Umxhuzulane okhethekileyo(g/m³) | 1.05 | 1.60 |
Viscosity (cps)@25℃ | 600-1000 | 800-1500 |
Umxholo oqinileyo (%) | 98 | 97 |
Mix ratio (ngokobunzima) | 1 | 2 |
Ixesha lokoma komhlaba (h) | 0.5 | |
Ubomi bembiza h (25℃) | 0.5 | |
Inkcazo yethiyori (DFT) | 0.15kg/㎡ ubukhulu befilimu 100μm |
Into | Umgangatho wovavanyo | Iziphumo |
Ukuqina kwepensile | 2H | |
Amandla ancamathelayo (Mpa) isiseko sesinyithi | HG/T 3831-2006 | 9.3 |
Amandla okunamathela (Mpa) isiseko sekhonkrithi | HG/T 3831-2006 | 3.2 |
Ukunganyibiliki | 2.1Mpa | |
Uvavanyo lokugoba (i-cylindrical axis) | ≤1mm | |
Ukuxhatshazwa kwe-abrasion (750g / 500r) mg | HG/T 3831-2006 | 12 |
Ukuchasana nempembelelo kg·cm | GB/T 1732 | 50 |
Ukuchasana nokuguga, ukuguga okukhawulezileyo 2000h | I-GB/T14522-1993 | Ukulahleka kokukhanya<1, ukutshotsholwa <1 |
|
Ngokweemfuno zakho zokwenyani, khetha eyona ndlela ifanelekileyo yoyilo kunye neenkqubo zokucwangcisa