SWD9604 room temperature cure water base environment friendly internal & external wall anticorrosion coating
Features and advantages
*The coating film is smooth and even, compact and solid, high adhesive strength
*excellent hiding effect and decoration effect.
*excellent uv resistance and anti-aging
*good acid, alkali and anticorrosion property
*excellent waterproof and mildew resistance
*it is water based coating, safe and eco friendly
*one component material, easy to apply, save labor cost.
Typical use
Widely applied on the internal wall and external wall anticorrosion waterproof protection (including the residential and industrial building)
Product information
| Item | Results |
| Appearance | Color adjustable |
| Gloss | matt |
| Solid content (%) | ≥63 |
| surface dry time (h) | Summer: 1-3h, winter: 3-6h |
| Theoretical coverage | 0.12kg/m2 (thickness 50 microns) |
Physical property
|
Item |
Results |
| status in container |
No lumps after mixing evenly, in uniform condition |
| application property |
Without barriers |
| stability at low temperature |
Not perishable |
| appearance |
Normal |
| dry time (surface dry time) |
≤2h |
| contrast ratio |
≥0.90 |
| water resistance (96h) |
Normal |
| alkali resistance (48h) |
Normal |
| scrub resistance |
≥2000 times |
| stain resistance |
＜30% |
| temperature variation resistance (5times) |
Normal |
| Tensile strength (Mpa) |
In standard condition 1.0 |
| Elongation rate (%) |
standard condition ≥200%; -10℃≥40%; heat treatment ≥100% |
| Density (g/cm³) |
1.27 |
| Resistance to artificial aging (400h) |
no bubbles, no peel off, no crack |
| Powdery |
≤1 class |
| Color changing |
≤2 class |
Application environment
Relative temperature: -5~-+35℃
Relative humidity: RH%:35-85%
Application tips
Recommended dft: 30-80 um
Re-coating interval: min: 3 h, max 28h
Coating method: airless spray, air spray, brush, roller
Application note
Clean up the substrate surface, without oil, dusts or rust.
The rest material can not be poured into the original bucket.
This material is water based coating, other solvent coating or paints shall not be added in.
Curing time
| Substrate temperature | Surface dry time | Foot traffic | Solid dry |
| +10℃ | 3h | 8h | 7d |
| +20℃ | 1h | 4h | 7d |
| +30℃ | 0.5h | 2h | 7d |
Shelf Life
* storage temperature: 5℃-35℃
* shelf life: 12 months (sealed)
*make sure the package sealed well
* store in cool and ventilated place, avoid direct sunshine
* package: 20kg/bucket, 25kg/bucket
Product health and safety information
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the latest Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.
Product health and safety information
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the latest Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.
Integrity declaration
SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.
|
- Waterborne Paint
Professional technical engineer dedicated to guide you
According to your actual needs, choose the most reasonable overall design and planning procedures