SWD9514 Movie props sesebelisoa le sebui se khethehileng se sireletsang polyurea coating
Likarolo tsa sehlahisoa le melemo
* Ha e na Solvent, 100% litaba tse tiileng, li bolokehile, ha li na tikoloho ebile ha li na monko.
*Kalafo e potlakileng, e ka fafatsoa ka sebopeho leha e le sefe se kobehileng, letsoapong le sebakeng se otlolohileng, ha ho sagging.
* Filimi ea ho roala e kopane, e teteaneng ebile e tenyetseha, e na le matla a phahameng a sekhomaretsi ka lehong le foam substrate.
* Ho hanyetsa tšusumetso e ntle haholo, ho hanyetsa ho thulana le ho hanyetsa abrasion
* Anticorrosion e ntle haholo le khanyetso ea lik'hemik'hale ho acid, alkali, letsoai joalo-joalo.
* Ts'ebetso e ntle ea ho ts'oaroa
* Ts'ebetso e ntle haholo ea ho thibela metsi le bopaki ba mongobo
*Ho hanyetsa ka mokhoa o babatsehang ho fapana ha mocheso
* Pheko e potlakileng, sebaka sa kopo se khutlela ts'ebeletso kapele
* Ho tšoarella ho hoholo ho fokotsa litšenyehelo tsa tlhokomelo ea bophelo ba ts'ebeletso
* Eketsa bophelo ba ts'ebeletso ea sebopeho se fafalitsoeng
Likarolo tsa ts'ebeliso
Ts'ireletso e ts'oarehang ea anticorrosion ea chute ea mashala, karohano ea spiral, tanka ea flotation, moropa oa ho hlatsoa, lebanta la phetiso le lisebelisoa tse ling tsa merafo.
Lintlha tsa sehlahisoa
| Ntho | A | B |
| Ponahalo | Mokelikeli o mosehla o mosehla | Mmala o fetohang |
| Karolo(g/m³) | 1.13 | 1.04 |
| Viscosity (cps)@25℃ | 650 | 720 |
| Litaba tse tiileng (%) | 100 | 100 |
| Ho kopanya karo-karolelano (karolelano ea molumo) | 1 | 1 |
| Nako ea gel(ea bobeli）@25℃ | 3-5 | |
| Nako ea ho omella (ea bobeli) | 10-20 | |
| Theoretical Coverage (botenya ba filimi e ommeng) | 1.03kg/㎡ botenya ba filimi: 1mm | |
Lintho tsa 'mele tsa lihlahisoa
| Lintho | Tekanyetso ea teko | Sephetho |
| Ho thatafala (Lebopo D) | ASTM D-2240 | 47 |
| Sekhahla sa bolelele (%) | ASTM D-412 | 150 |
| Tensile matla (Mpa) | ASTM D-412 | 20 |
| Matla a ho lla (N/km) | ASTM D-624 | 65 |
| Ho se lekane (0.3Mpa/30min) | HG/T 3831-2006 | e sa kenelleheng |
| Ho hanyetsa ho roala (750g/500r)/mg | HG/T 3831-2006 | 4.5 |
| Matla a ho khomarela (Mpa) motheo oa konkreite | HG/T 3831-2006 | 3.1 |
| Matla a ho khomarela (Mpa) motheo oa tšepe | HG/T 3831-2006 | 11 |
| Density (g/cm³) | GB/T 6750-2007 | 1.02 |
| Ho arohana ha Cathodic [1.5v, (65±5) ℃,48h] | HG/T 3831-2006 | ≤15 limilimithara |
Sehlahisoa corrosion medium
| Ho hanyetsa asiti 10% H2SO4 kapa 10%HCI,30d | Ha ho mafome, ha ho na lipululana, ha ho na lekhalo |
| Ho hanyetsa alkali 10% NaOH, 30d | Ha ho mafome, ha ho na lipululana, ha ho na lekhalo |
| Ho hanyetsa letsoai 30g/L,30d | Ha ho mafome, ha ho na lipululana, ha ho na lekhalo |
| Ho hanyetsa ho fafatsa letsoai, 2000h | Ha ho mafome, ha ho na lipululana, ha ho na lekhalo |
| Ho hanyetsa oli 0# diesel, e tala, 30d | Ha ho mafome, ha ho na lipululana, ha ho na lekhalo |
| (Bakeng sa litšupiso: lintlha tse ka holimo li fumanoa ho ipapisitsoe le tekanyetso ea tlhahlobo ea GB / T9274-1988. Ela hloko tšusumetso ea moea, ho phatloha le ho qhalana. Ho khothaletsoa tlhahlobo ea ho qoelisoa ka boikemelo haeba e hloka lintlha tse ling tse khethehileng) | |
Tikoloho ea kopo ea sehlahisoa
| Mocheso oa tikoloho | 0 ℃-45 ℃ |
| Sehlahisoa spray futhumatsang mocheso | 65℃-70°C |
| Pipe futhumatsang mocheso | 55 ℃-65 ℃ |
| Mongobo o amanang | ≤75% |
| Ntlha ea phoka | ≥3℃ |
Tataiso ea kopo ea sehlahisoa
| Khothalletsa mochini oa spray | GRACO H-XP3 Polyurea spray lisebelisoa |
| Sethunya se fafatsang | Liaparo tsa ho itlhoekisa moea kapa mochini bakeng sa sethunya sa spray |
| Khatello e tsitsitseng | 2300-2500psi |
| Khatello e matla | 2000-2200psi |
| Khothalletsa botenya ba filimi | 1000-3000μm |
| Nako ea ho khutlisa | ≤6h |
Tlhaloso ea kopo
Hlohlelletsa junifomo ea karolo ea B pele ho kopo, kopanya ka botlalo li-pigment tse kentsoeng, kapa boleng ba sehlahisoa bo tla ameha.
fafatsa polyurea ka nako e loketseng haeba bokaholimo ba substrate bo hloekisitsoe.Bakeng sa mokhoa oa kopo le nako ea nako ea SWD polyurea speical primer ka kopo sheba bukana e 'ngoe ea lik'hamphani tsa SWD.
Kamehla sebelisa SWD spray polyurea sebakeng se senyenyane pele kopo e kholo ho hlahloba karolelano ea motsoako, 'mala le phello ea spray li nepahetse.Bakeng sa tlhaiso-leseling e batsi ea ts'ebeliso ka kopo sheba leqephe la morao-rao la litaelo tsa litaelo tsa ts'ebeliso ea letoto la SWD spray polyurea.
Nako ea pheko ea sehlahisoa
| Mocheso oa substrate | Omme | Sephethephethe sa maoto | E tiileng e ommeng |
| +10 ℃ | 20s | 45 mets | 7d |
| +20 ℃ | 15s | 15 mets | 6d |
| +30 ℃ | 12s | 5 mets | 5d |
Tlhokomeliso: nako ea ho phekola e fapana ho ea ka boemo ba tikoloho haholo-holo mocheso le mongobo o lekanyelitsoeng.
Shelf bophelo
* Ho tloha ka letsatsi la moetsi le boemong ba sephutheloana sa mantlha se tiisitsoeng:
A: Likhoeli tse 10
B: Likhoeli tse 10
*Mocheso oa polokelo: +5-35°C
Ho paka: Karolo ea A 210kg/drum, karolo ea B 200kg/drum
Etsa bonnete ba hore sephutheloana sa sehlahisoa se tiisitsoe hantle
* boloka sebakeng se pholileng le se nang le moea o pholileng, qoba ho pepesehela letsatsi ka kotloloho.
Lintlha tsa bophelo bo botle le polokeho ea sehlahisoa
Bakeng sa tlhahisoleseling le likeletso mabapi le ts'ebetso e bolokehileng, polokelo le ho lahloa ha lihlahisoa tsa lik'hemik'hale, basebelisi ba tla bua ka Leqephe la Boitsebiso la Tšireletso ea Material la morao-rao le nang le lintlha tsa 'mele, tsa tikoloho, tsa chefo le tse ling tse amanang le polokeho.
Phatlalatso ea botšepehi
SWD e netefatsa lintlha tsohle tsa tekheniki tse boletsoeng leqepheng lena li ipapisitse le liteko tsa laboratori.Mekhoa ea 'nete ea tlhahlobo e ka fapana ka lebaka la maemo a fapaneng.Ka hona, ka kopo, leka 'me u netefatse hore e sebetsa.SWD ha e nke boikarabelo bo bong ntle le boleng ba sehlahisoa mme e boloka tokelo ea liphetoho leha e le life ho data e thathamisitsoeng ntle le tsebiso pele.
|
- Polyurea
- Ho roala ha polyurea
- Litheko tsa ho roala Polyurea
- Polyurea Bakeng sa Cartridge ea Lihlomo
- Lintho tse nang le polyurea
- Polyurethane ea polyurethane
- Theko ea Polyurea
- Spray ea polyurea
- Polyurea e hloekileng
- Hlatsoa polyurea
- Polyurea ea Transparent
Moenjineri ea hloahloa oa tekheniki ea inehetseng ho u tataisa
Ho ea ka litlhoko tsa hau tsa 'nete, khetha mekhoa e metle ka ho fetesisa ea moralo le moralo