SWD9515 yakadyarwa padenga midzi puncture kuramba yakakosha polyurea isina mvura inodzivirira coating
Zvigadzirwa uye zvakanakira
* Solvent yemahara, 100% yakasimba yemukati, yakachengeteka, ine hushamwari nharaunda uye isina kunhuwa.
*Kurapa nekukurumidza, kunogona kupfapfaidzwa kuumba pane chero yakakombama, materu uye yakatwasuka nzvimbo, pasina kusagika.
* Dense coating, isina musono, ine yakanaka kuchinjika.
*Simba rekunamira rakasimba, kukurumidza kusungirirana zvakanaka pasimbi, kongiri, huni, girazi fibers uye mamwe ma substrates.
* Yakanakisa kukanganisa kupikisa, abrasion kuramba
* Yakanakisa corrosion kuramba uye makemikari kuramba acids, alkali, munyu nezvimwe.
* Yakanakisa puncture kuramba midzi yechirimwa, kupinda mukati uye kusapinda kwemvura
*Good shock inonwisa kuita
* Yakanakisa kuramba kushanduka kwekushisa
* Kurumidza kurapwa, saiti yekushandisa dzokera kubasa nekukurumidza
* Yakanyanya kusimba kudzikisa mutengo wekugadzirisa wehupenyu hwesevhisi
* Wedzera hupenyu hwesevhisi yeyakapfapfaidzwa chimiro
Product Applications
Midzi kuramba kudzivirira mvura kwegadheni repadenga, urban square uye imwe denga rakadyarwa
Product information
| Item | A | B |
| Chitarisiko | Pale yellow liquid | Chinogadziriswa ruvara |
| Chaiyo giravhiti (g/m³) | 1.13 | 1.04 |
| Viscosity (cps)@25℃ | 810 | 670 |
| Solid content (%) | 100 | 100 |
| Mixing ratio (volume ratio) | 0 | 0 |
| Gel nguva(yechipiri）@25℃ | 1 | 1 |
| Nguva yakaoma (yechipiri) | 3-5 | |
| Theoretical Coverage (dft) | 1.02kg/㎡ firimu ukobvu: 1mm | |
Zvenyama zvezvigadzirwa
| Items | Test standard | Mhedzisiro |
| Kuoma (Shore A) | ASTM D-2240 | 89 |
| Elongation rate (%) | ASTM D-412 | 450 |
| Kusimba simba (Mpa) | ASTM D-412 | 17 |
| Simba rekubvarura (N/km) | ASTM D-624 | 65 |
| Kusakwana (0.3Mpa/30min) | HG/T 3831-2006 | isingapindiki |
| Pfeka kuramba (750g/500r)/mg | HG/T 3831-2006 | 4.2 |
| Adhesive simba (Mpa) kongiri base | HG/T 3831-2006 | 3.4 |
| Adhesive simba (Mpa) simbi base | HG/T 3831-2006 | 11 |
| Density (g/cm³) | GB/T 6750-2007 | 1.02 |
| Cathodic disbondment [1.5v,(65±5)℃,48h] | HG/T 3831-2006 | ≤15mm |
Chinyorwa chekushandisa
Gadzirisa chikamu B yunifomu usati waisa, nyatso sanganisa iwo akaiswa pigment, kana mhando yechigadzirwa ichakanganiswa.
pfapfaidza polyurea mukati menguva yakafanira kana iyo substrate yepasi yakadhindwa.Kune nzira yekushandisa uye nguva yenguva yeSWD polyurea speical primer ndapota tarisa kune rimwe bhurocha remakambani eSWD.
Gara uchiisa SWD pfapfaidza polyurea panzvimbo diki isati yakakura application kutarisa musanganiswa reshiyo, ruvara uye kupfapfaidza maitiro ndizvo.Kuti uwane ruzivo rwakadzama rwekushandisa ndapota tarisa kune yazvino mirairo pepa remirairo yekushandisa yeSWD spray polyurea akateedzana.
Nguva yekugadzirisa chigadzirwa
| Substrate tembiricha | Dry | Kufamba kwetsoka | Yakasimba yakaoma |
| +10 ℃ | 20s | 45min | 7d |
| +20 ℃ | 15s | 15min | 6d |
| +30 ℃ | 12s | 5min | 5d |
Cherechedza: nguva yekurapa inosiyana nemamiriro ekunze kunyanya tembiricha uye hunyoro hunoenderana.
Sherufu hupenyu
*Kubva pazuva remugadziri uye pane yekutanga package yakavharwa mamiriro:
A: mwedzi gumi
B: mwedzi gumi
*kuchengetera tembiricha:+5-35°C
Kurongedza: Chikamu A 210kg / dhiramu, chikamu B 200kg / chigubhu
Ita shuwa kuti chigadzirwa pasuru yakavharwa zvakanaka
* chengeta munzvimbo inotonhorera uye inofefetera, dzivirira kuratidzwa kwezuva kwakananga.
|
- Polyurea
- Polyurea Coating
- Polyurea Coating Prices
- Polyurea Yezvombo Cartridge
- Polyurea Material
- Polyurea Polyurethane
- Polyurea Mutengo
- Polyurea Spray
- Polyurea yakachena
- Spray Polyurea
- Transparent Polyurea
Professional tekinoroji mainjiniya akazvipira kukutungamira
Zvinoenderana nezvido zvako chaizvo, sarudza inonzwisisika yakazara dhizaini uye kuronga maitiro