Silicone Drainage Tube

Introduction

Aplication:It is used for external negative pressure drainage device to timely discharge exudate and blood from the wound, prevent wound infection and promote wound healing,Matching negative pressure ball and needle.

Product Details

Product Tags

Silicone round channel drainage tube Product Instructions

1. Remove the outer packaging before entering the operation.
2. At the end of the operation soon, open the package and remove the drainage tube with the guide needle.

3. Adjust the curvature of the guide needle appropriately according to the operation needs, remove the top protective cover of the guide needle, stab into the human skin tissue, and slowly pull the drainage pipe outward. When the black electric sign on the surface of the drainage tube can stop the drawing, the one end of the drainage can be placed in the place where drainage is required.

4. One end of the drainage tube belt drainage needs to be fully placed in the body, and the excess drain tube can be cut off according to the length.
5. Open the package and remove the negative pressure ball (and drainage bag).
6. Cut off one end of the drain guide needle and closely link the drain with the negative pressure ball link mouth.
7. Open the stop liquid clip appropriately as necessary, so that the waste liquid in the patient’s body slowly attracts from the drainage tube to the negative pressure ball.
8. Pay attention to observe whether the pipeline is sealed when opening.

9. When the negative pressure ball is full to full load, close the liquid clip, open the liquid, pour out the waste liquid, and repeat the operation step by step according to Article 5 and 7 of this article.
10. Negative pressure ball with drainage bag, when the negative pressure ball attracted to full load, open the lower stop clip, extrusion negative pressure ball using the waste liquid slowly discharged to the drainage bag, exhaust the negative pressure ball air, close the stop clip to continue drainage, repeat the above operation, when the drainage bag close to full load time, open the cross valve under the drainage bag, continue to use after the waste liquid.

Silicone round channel drainage tube Product Advantage

Tube body

The tube body is soft without stimulation, and the front end of the tube is smooth to avoid damaging the mucous membrane

Good compatibility

Biological inertia, good compatibility, no specific change in long-term contact with the body tissue and blood, long-term retention

X-ray

X-ray helps to determine the exact position of the tube in the body

Puncture Needle

Connect negative pressure suction device and stainless steel puncture needle, stainless steel puncture needle is sharp, sharp, easy to puncture, small wound

The soft mouth of the tube can reduce the pressure on the wound. And the three sections are formed in one with different structures, which has excellent anti kink performance. and fully open drainage groove can make any point any point in the body can be drained.
 It is used for external negative pressure drainage device to timely discharge exudate and blood from the wound, prevent wound infection and promote wound healing,Matching negative pressure ball and needle.

Silicone drain is used to drain fluid or pus from a wound or surgical incision. They are made of silicone, a durable and flexible material that is resistant to bacteria and other contaminants. Silicone drainage tubes are available in a variety of sizes and shapes, and are often color-coded to indicate the type of drainage they are designed to collect. They are also available with a variety of connectors, including those that fit into standard drainage bottles. Silicone drainage tubes are easy to clean and can be sterilized in an autoclave.Silicone drainage tubes are often used to treat chronic wounds, such as pressure ulcers, and to drain abscesses or other fluid accumulations.

Fig. 1 Structure of round tube

Fig. 2 Flat tube structure

Fig. 3 Cross tube structure

The size of the drainage tube should be in accordance with the provisions of Table 2.

Table 2 Basic size table of drainage tube (Unit: mm)

Size: FR8-FR24

Specification

Round tube

Cross tube structure

Total length of drainage tube L

±20

Fr

Outer diameter±0.3

Outer diameter±0.3

Length of cross section L2

±20

8

2.7

2.7

300

1000

10

3.3

3.3

12

4.0

4.0

14

4.7

4.7

15

/

5.0

16

5.3

5.3

18

6.0

6.0

19

/

6.3

20

6.7

6.7

22

7.3

7.3

24

8.0

8.0

 

Flat tube

Width a

±0.5

Height b

±0.5

Flat tube length L1

±5

Total length L

±20

Round tube inner diameter±0.3

Outer diameter of round tube±0.3

Specification Model 3×7

7

3

220

1000

3

5

4×10

10

4

 

You can’t find a more trusted manufacturer. Go to the site to learn more about silicone catheters or contact us to learn more.

Contact Us


  • Previous:
  • Next:

  • Write your message here and send it to us

    Professional technical engineer dedicated to guide you

    According to your actual needs, choose the most reasonable overall design and planning procedures