of Chinese Stone Machinery
DOCSIS 3.1 Compliant; Backward compatible with DOCSIS/EuroDOCSIS 3.0
Switchable Diplexer for upstream and downstream
2x 192 MHz OFDM Downstream reception capability
32x SC-QAM (Single-Carries QAM) Channel Downstream reception capability
2x 96 MHz OFDMA Upstream transmission capability
8x SC-QAM Channel upstream transmission capability
FBC (Full-Band Capture) Front End
4x Gigabit Ethernet Ports
1x USB3.0 Host, 1.5A limitation (Typ.) (Optional)
Wireless networking on-board:
- IEEE 802.11n 2.4GHz (3×3)
- IEEE 802.11ac Wave2 5GHz (4×4)
SNMP and TR-069 remote management
Dual stack IPv4 and IPv6
Connectivity Interface |
||
RF |
75 OHM Female F Connector |
|
RJ45 |
4x RJ45 Ethernet port 10/100/1000 Mbps |
|
WiFi |
IEEE 802.11n 2.4GHz 3×3 IEEE 802.11ac Wave2 5GHz 4×4 |
|
1x USB 3.0 Host (Optional) |
||
RF Downstream | ||
108-1218 MHz 258-1218 MHz |
||
75 OHM |
||
<40 dBmV |
||
> 6 dB | ||
SC-QAM Channels |
||
32 Max. |
||
North Am (64 QAM, 256 QAM): -15 to + 15 dBmV Euro (64 QAM): -17 to + 13 dBmV Euro (256 QAM): -13 to + 17dBmV |
||
64 QAM, 256 QAM |
||
North Am (64 QAM): 5.056941 Msym/s North Am (256 QAM): 5.360537 Msym/s Euro (64 QAM, 256 QAM): 6.952 Msym/s |
||
North Am (64 QAM/256QAM with α=0.18/0.12): 6 MHz EURO (64 QAM/256QAM with α=0.15): 8 MHz |
||
OFDM Channels |
||
OFDM |
||
192 MHz |
||
24 MHz |
||
2 |
||
25 KHz 8K FFT 50 KHz 4K FFT |
||
25 KHz / 40 us 50 KHz / 20 us |
||
QPSK, 16-QAM, 64-QAM,128-QAM, 256-QAM, 512-QAM, 1024-QAM, 2048-QAM, 4096-QAM |
||
Support with subcarrier granularity Support zero bit loaded subcarriers |
||
-9 dBmV/24 MHz to 21 dBmV/24 MHz |
||
Upstream |
||
5-85 MHz 5-204 MHz |
||
75 OHM |
||
(Total average power) +65 dBmV |
||
>6 dB |
||
SC-QAM Channels |
||
TDMA, S-CDMA |
||
8 Max. |
||
QPSK, 8 QAM, 16 QAM, 32 QAM, 64 QAM, and 128 QAM |
||
TDMA: 1280, 2560, and 5120 KHzS-CDMA: 1280, 2560, and 5120 KHzPre-DOCSIS3 operation: TDMA: 160, 320, and 640 KHz | ||
TDMA: 1600, 3200, and 6400 KHzS-CDMA: 1600, 3200, and 6400 KHzPre-DOCSIS3 operation: TDMA: 200, 400, and 800 KHz | ||
Pmin = +17 dBmV at ≤1280 KHz modulation ratePmin = +20 dBmV at 2560 KHz modulation ratePmin = +23 dBmV at 5120 KHz modulation rate | ||
OFDMA Channels | ||
OFDMA |
||
96 MHz |
||
6.4 MHz (for 25 KHz subcarrier spacing) 10 MHz (for 50 KHz subcarriers spacing) |
||
2 |
||
25, 50 KHz |
||
50 KHz: 2048 (2K FFT); 1900 Max. active subcarriers 25 KHz: 4096 (4K FFT); 3800 Max. active subcarriers |
||
102.4 (96 MHz Block Size) |
||
40 us (25 KHz subcarriers) 20 us (50 KHz subcarriers) |
||
BPSK, QPSK, 8-QAM, 16-QAM, 32-QAM, 64-QAM,128-QAM, 256-QAM, 512-QAM, 1024-QAM, 2048-QAM, 4096-QAM |
||
WiFi |
||
Full dual band concurrent WiFi |
2.4GHz (3×3) IEEE 802.11n AP 5GHz (4×4) IEEE 802.11ac Wave2 AP |
|
2.4GHz WiFi Power |
Up to +20dBm |
|
5GHz WiFi Power |
Up to +36dBm |
|
WiFi Protected Setup (WPS) |
||
WiFi Security Levers |
WPA2 Enterprise / WPA Enterprise WPA2 Personal / WPA Personal IEEE 802.1x port-based authentication with RADIUS client |
|
Up to 8 SSIDs per radio interface |
||
3×3 MIMO 2.4GHz WiFi features |
SGI STBC 20/40MHz coexistence |
|
4×4 MU-MIMO 5GHz WiFi features |
SGI STBC LDPC (FEC) 20/40/80/160MHz mode Multi-User MIMO |
|
Manual / auto radio channel selection |
||
Mechanical |
||
PWR/WiFi/WPS/Internet |
||
WiFi on/off button WPS button Reset button (recessed) Power on/off button |
||
TBD |
||
TBD |
||
Environmental |
||
12V/3A |
||
<36W (Max.) |
||
0 to 40 oC |
||
10~90% (Non Condensing) |
||
-20 to 70 oC |
||
Accessories |
||
1x User Guide |
||
1x 1.5M Ethernet Cable |
||
4x Label (SN, MAC Address) |
||
1x Power Adapter Input: 100-240VAC, 50/60Hz; Output: 12VDC/3A |
According to your actual needs, choose the most reasonable overall design and planning procedures