SWD9515 anabzala padenga muzu puncture kukana wapadera polyurea madzi zoteteza ❖ kuyanika
Zogulitsa katundu ndi ubwino
* Zosungunulira zaulere, 100% zolimba, zotetezeka, zosagwirizana ndi chilengedwe komanso zopanda fungo.
*Kuchiza mwachangu, kutha kupopera mbewuzo ndikupangika pamalo aliwonse opindika, otsetsereka komanso oyima, osagwedera.
* Kupaka kowuma, kopanda msoko, komanso kusinthasintha kwabwino.
* Mphamvu zomatira zolimba, zomangika mwachangu pazitsulo, konkire, matabwa, ulusi wagalasi ndi magawo ena.
* Kukana kwamphamvu kwambiri, kukana kwa abrasion
*Kukana kwabwino kwa dzimbiri komanso kukana mankhwala ku acid, alkali, salt etc.
*Kukana kwabwino kwambiri polimbana ndi mizu ya mbewu, kukana kulowa mkati komanso kusalowa madzi
* Kuchita bwino kwamphamvu kwamphamvu
*Kukana kwabwinoko pakusiyanasiyana kwa kutentha
*Kuchiza mwachangu, tsamba lofunsira libwerere kuntchito mwachangu
* Kukhazikika kwabwino kwambiri kuti muchepetse mtengo wokonza moyo wautumiki
* Wonjezerani moyo wautumiki wamapangidwe opopera
Zofunsira Zamalonda
Mizu kukana chitetezo madzi a padenga dimba, mabwalo a m'tauni ndi zina anabzala denga
Zambiri zamalonda
| Kanthu | A | B |
| Maonekedwe | Madzi otumbululuka achikasu | Mtundu wosinthika |
| Kukoka kwapadera (g/m³) | 1.13 | 1.04 |
| Viscosity (cps)@25 ℃ | 810 | 670 |
| Zolimba (%) | 100 | 100 |
| Mixing ratio (chiwerengero cha voliyumu) | 0 | 0 |
| Gel nthawi (yachiwiri）@25 ℃ | 1 | 1 |
| Nthawi yowuma (yachiwiri) | 3-5 | |
| Kufotokozera za Theoretical (dft) | 1.02kg/㎡ filimu makulidwe: 1mm | |
Thupi katundu wa mankhwala
| Zinthu | Mayeso muyezo | Zotsatira |
| Kulimba (Shore A) | ASTM D-2240 | 89 |
| Elongation rate (%) | Chithunzi cha ASTM D-412 | 450 |
| Mphamvu yamagetsi (Mpa) | Chithunzi cha ASTM D-412 | 17 |
| Mphamvu yamisozi (N/km) | Chithunzi cha ASTM D-624 | 65 |
| Kusakwanira (0.3Mpa/30min) | HG/T 3831-2006 | wosalowerera |
| Kukana kuvala (750g/500r)/mg | HG/T 3831-2006 | 4.2 |
| Mphamvu zomatira (Mpa) maziko a konkriti | HG/T 3831-2006 | 3.4 |
| Adhesive mphamvu (Mpa) zitsulo base | HG/T 3831-2006 | 11 |
| Kachulukidwe (g/cm³) | GB/T 6750-2007 | 1.02 |
| Kutayika kwa Cathodic [1.5v, (65±5) ℃,48h] | HG/T 3831-2006 | ≤15 mm |
Chidziwitso cha ntchito
Sungunulani yunifolomu ya gawo B musanagwiritse ntchito, sakanizani bwino ma pigment oyikidwa, kapena mtundu wa mankhwalawo ukhudzidwa.
tsitsani polyurea mkati mwa nthawi yoyenera ngati gawo lapansi lakonzedwa.Kuti mupeze njira yogwiritsira ntchito komanso nthawi yapakati ya SWD polyurea speical primer chonde onani kabuku kena kamakampani a SWD.
Nthawi zonse ikani SWD spray polyurea pamalo ang'onoang'ono musanagwiritse ntchito kwambiri kuti muwone kuchuluka kwa kusakaniza, mtundu ndi zotsatira za kutsitsi ndizolondola.Kuti mudziwe zambiri za momwe mungagwiritsire ntchito, chonde onani tsamba laposachedwa la malangizo ogwiritsira ntchito a SWD spray polyurea series.
Product mankhwala nthawi
| Kutentha kwa gawo lapansi | Zouma | Magalimoto oyenda pansi | Zolimba zouma |
| + 10 ℃ | 20s | 45 min | 7d |
| + 20 ℃ | 15s | 15 min | 6d |
| + 30 ℃ | 12s | 5 min | 5d |
Chidziwitso: nthawi yochiritsa imasiyana malinga ndi momwe chilengedwe chimakhalira makamaka kutentha ndi chinyezi.
Alumali moyo
*Kuyambira tsiku la wopanga komanso pa phukusi losindikizidwa loyambirira:
A: 10 miyezi
B:miyezi 10
*kusungira kutentha: +5-35°C
Kulongedza: Gawo A 210kg/ng'oma, gawo B 200kg/ng'oma
Onetsetsani kuti katundu phukusi losindikizidwa bwino
* sungani pamalo ozizira komanso olowera mpweya wabwino, pewani kutenthedwa ndi dzuwa.
|
- Polyurea
- Kupaka kwa Polyurea
- Mitengo Yopaka Polyurea
- Polyurea Kwa Cartridge ya Armor
- Zinthu za Polyurea
- Mtundu wa Polyurethane
- Mtengo wa Polyurea
- Polyurea Spray
- Polyurea Yoyera
- Kupopera Polyurea
- Transparent Polyurea
Katswiri waukadaulo wodzipereka kukutsogolerani
Malingana ndi zosowa zanu zenizeni, sankhani ndondomeko yoyenera kwambiri yokonzekera ndikukonzekera