MK503P 5G CPE Product Specification
1. Overview
Suzhou MK503P is a 5G Sub-6 GHz CPE（Consumer Premise Equipment）device。MK503P accord with 3GPP Release 15 Communication Standard, Support 5G NSA（Non-Standalone）and SA （Standalone）。
2. Features
- Design for IoT/M2M application
- Support 5G and 4G LTE-A Applicable Network
- Support 5G NSA and SA Network Mode
- Support 5G network slicing to meet the application needs of differentiated industries
- GNSS inside
- Standard POE isolated power supply，802.11 af/at
- IP67 Protection Level
- Shell intensification，thermostability，strong
- 6KV Surge Protection，15KV ESD Protection
- nano SIM card inside，output interface only RJ45*1
3. Applications
• Emergency broadcast
• Security monitoring
• Self-service vending machine
• Billboard
• Water conservancy and power grid
• Patrol robot
• Smart city
4. Technical Parameter
|
Region |
Global |
|
Band Information |
|
|
5G NR |
n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48/n66/n71/n77/n78/n79 |
|
LTE-FDD |
B1/B2/B3/B4/B5/B7/B8/B9/B12/B13/B14/B17/B18/B19/B20/B25/B26/B28/B29/B30 /B32/B66/B71 |
|
LTE-TDD |
B34/B38/39/B40/B41/B42/B43/B48 |
|
LAA |
B46 |
|
WCDMA |
B1/B2/B3/B4/B5/B6/B8/B19 |
|
GNSS |
GPS/GLONASS/BeiDou (Compass)/Galileo |
|
Certification |
|
|
Operator Certification |
TBD |
|
Compulsory Certification |
Global: GCF Europe: CE North America: FCC/IC/PTCRB China: CCC |
|
Other Certification |
RoHS/WHQL |
|
Transmission Rate |
|
|
5G SA Sub-6 |
DL 2.1 Gbps; UL 900 Mbps |
|
5G NSA Sub-6 |
DL 2.5 Gbps; UL 650 Mbps |
|
LTE |
DL 1.0 Gbps; UL 200 Mbps |
|
WCDMA |
DL 42 Mbps; UL 5.76 Mbps |
|
Interface |
|
|
SIM |
x1 nano card inside （note：inside currently） |
|
POE RJ45 |
x1, 10M/100M/1000Mbps RJ45 with POE |
|
Electrical Characteristics |
|
|
Power Supply |
POE PD mode A or B, Input +48 to +54V DC，IEEE 802.3af/at |
|
Power |
< 12W（max.） |
|
Protection Level |
|
|
Waterproof |
IP67 |
|
Surge |
POE RJ45：Common mode +/-6KV，Differential mode+/-2KV |
|
ESD |
Air discharge +/-15KV，contact discharge +/-8KV |
|
Environment |
|
|
Operating Temperature |
-20 ~ +60°C |
|
Humidity |
5% ~ 95% |
|
Shell Material |
Metal + Plastic |
|
Dimension |
220*220*45mm (without Mounting bracket) |
|
Weight |
720g (without Mounting bracket) |
|
Mounting |
Support Clip code / Nut Mounting |
|
Packing List |
|
|
Power Supply Adapter |
Name：POE Power Adapter Input：AC100~240V 50~60Hz Output：DC 52V/0.55A |
|
Ethernet Cable |
CAT-5E Gigabit Ethernet cable，Length 1.5m Depending on the actual installation, the user can set up a Ethernet cable of appropriate length by self |
|
Mounting Bracket |
L type bracket x1 U type clip code x1 |
5. Installation Instructions
• Ethernet Cable Installation Instructions
Based on the outdoor waterproof requirements, the selection and installation of MK503P Ethernet cable need special treatment.
Ethernet cable choose：
1.The ethernet cable must be CAT5E，wire above 0.48mm
2.RJ45 Plug Must be without sheath
3.The ethernet cable must be round with a diameter greater than 5mm
Ethernet cable install：
1.Thread ethernet cable
2.Tighten waterproof cap
3.Connect ethernet cable to MK503P
4.Tighten water head
• POE power supply Instructions
MK503P only support POE power supply，If RJ45 of application terminal support POE power supply，Application terminal can connect to MK503P through ethernet cable.
If application terminal do not support POE PSE，A gigabit POE power adapter is need. Refer to following figure for wiring.
The following figure is the wiring diagram for simulating the actual use
• Installation
Clip installation, it is fixed on the holding pole with U-shaped clamp code.
Nut installation，fixed on other installation platforms.
Professional technical engineer dedicated to guide you
According to your actual needs, choose the most reasonable overall design and planning procedures