HK-14-16AP-605
| The defining characteristics of operation | Operating Parameter | Value | Units |
| Free Position FP | 15.9±0.2 | mm | |
| Operating Position OP | 14.9±0.5 | mm | |
| Releasing Position RP | 15.2±0.5 | mm | |
| Total travel Position | 13.1 | mm | |
| Operating Force OF | 0.25~4 | N | |
| Releasing Force RF | — | N | |
| Total travel Force TTF | — | N | |
| Pre Travel PT | 0.5~1.6 | mm | |
| Over Travel OT | 1.0Min | mm | |
| Movement Differential MD | 0.4Max | mm |
Switch technical Characteristics
| ITEM | technical parameter | Value | |
| 1 | Contact Resistance | ≤30mΩ Initial value | |
| 2 | Insulation Resistance | ≥100MΩ500VDC | |
| 3 | Dielectric Voltage | between non-connected terminals | 1000V/0.5mA/60S |
| between terminals and the metal frame | 3000V/0.5mA/60S | ||
| 4 | Electrical Life | ≥50000 cycles | |
| 5 | Mechanical Life | ≥1000000 cycles | |
| 6 | Operating Temperature | -25~125℃ | |
| 7 | Operating Frequency | electrical:15 cycles Mechanical:60 cycles |
|
| 8 | Vibration Proof | Vibration Frequency:10~55HZ; Amplitude:1.5mm; Three directions:1H |
|
| 9 | Solder Ability: More than 80% of immersed part shall be covered with solder | Soldering Temperature:235±5℃ Immersing Time:2~3S |
|
| 10 | Solder Heat Resistance | Dip Soldering:260±5℃ 5±1S Manual Soldering:300±5℃ 2~3S |
|
| 11 | Safety Approvals | UL,CSA,VDE,ENEC,TUV,CE,KC,CQC | |
| 12 | Test Conditions | Ambient Temperature:20±5℃ Relative Humidity:65±5%RH Air Pressure:86~106KPa |
|
Switch application: widely used in various household appliances, electronic equipment, automation equipment, communication equipment, automotive electronics, power tools and other fields.
Write your message here and send it to us
Professional technical engineer dedicated to guide you
According to your actual needs, choose the most reasonable overall design and planning procedures