High Quality Oil Soluble Dyes Tintes solubles en aceite

Introduction

Advanced plastic colorants are ideal colorants for various plastics, with the advantages of strong tinting strength, good heat resistance, high light fastness, acid and alkali resistance and bright color. At present, it is widely used in the coloring of daily plastics, bobbin materials, industrial grease, paint ink, masterbatch and other materials. Some varieties are suitable for coloring spinning of chemical fiber, polyester, nylon, acetate fiber, etc.

Product Details

Product Tags

details picture

Solvent Black 3

Solvent Black 5

Solvent Black 7

Solvent Red 24

Solvent Red 52

Solvent Yellow 14

Solvent Red 111-1

Solvent Yellow 16

Solvent Blue 35

Solvent Blue36

Scope of use

Advanced plastic colorants belong to the category of oil-soluble dyes and can be dissolved in organic solvents. It can be used in a single color or in various shades according to a certain proportion. Both are suitable for the dyeing of the following plastics.
(PS) polystyrene (SB) styrene-butadiene copolymer
(HIPS) high anti-filled polystyrene (AS) acrylonitrile-styrene copolymer
(PC) Polycarbonate (ABS) Acrylonitrile-Butadiene-Styrene Copolymer
(UPVC) rigid polyvinyl chloride (372) styrene-methacrylic acid copolymer
(PMMA) polymetl methacrylate (CA) cellulose acetate
(SAN) Styrene-acrylonitrile copolymer (CP) acrylic cellulose

Dye application

When the above dyes are dissolved in the plastic melt, they are distributed in a certain molecular shape. When coloring various plastics, a certain proportion can be directly added to the plastics and evenly mixed to be pre-molded or molded, and the hue concentration can be adjusted according to the needs. In the transparent and clean resin, the dye can obtain bright and transparent shades. If used in combination with an appropriate amount of titanium dioxide and dyes, translucent or opaque shades can be obtained. The dosage can be negotiated according to the needs. The general dosage for transparent shades is 0.02%-0.05%, and the normal dosage for opaque shades is about 0.1%.

Quality Index

Heat resistance up to 240℃-300℃
The light fastness is grade 6-7 and grade 7-8 respectively
The migration resistance reaches grades 3-4 and 4-5 respectively
The tinting strength is 100%±3%
Moisture<1%
Fineness passed through 60 mesh sieve


  • Previous:
  • Next:

  • Write your message here and send it to us

    Professional technical engineer dedicated to guide you

    According to your actual needs, choose the most reasonable overall design and planning procedures