FSK-18-T-023
Switch technical Characteristics
|
ITEM） |
（technical parameter） |
（Value） |
|
|
1 |
（Electrical Rating） |
0.1A 250VAC |
|
|
2 |
(Operating Force) |
1.0～2.5N |
|
|
3 |
（Contact Resistance） |
≤300mΩ |
|
|
4 |
(Insulation Resistance) |
≥100MΩ(500VDC) |
|
|
5 |
（Dielectric Voltage） |
（between non-connected terminals） |
500V/0.5mA/60S |
|
(between terminals and the metal frame) |
1500V/0.5mA/60S |
||
|
6 |
(Electrical Life) |
≥50000 cycles |
|
|
7 |
(Mechanical Life) |
≥100000 cycles |
|
|
8 |
（Operating Temperature） |
-25～105℃ |
|
|
9 |
（Operating Frequency） |
（electrical）:15 cycles（Mechanical）:60 cycles |
|
|
10 |
（Vibration Proof） |
（Vibration Frequency）：10～55HZ；（Amplitude）：1.5mm;（Three directions）:1H |
|
|
11 |
(Solder Ability)(More than 80% of immersed part shall be covered with solder) |
(Soldering Temperature)：235±5℃(Immersing Time)：2～3S |
|
|
12 |
（Solder Heat Resistance） |
（Dip Soldering）：260±5℃ 5±1SManual Soldering）：300±5℃ 2～3S |
|
|
13 |
（Test Conditions） |
（Ambient Temperature）：20±5℃（Relative Humidity）：65±5%RH（Air Pressure）：86～106KPa |
|
The widespread use of micro switches in the automotive industry
The widespread use of micro switches in the automotive industry also includes:
• Open and close the convertible top: a micro switch will tell whether the top is closed or opened to the desired position.
• Open and close the tailgate: The micro switch is part of the opening and release mechanism of the tailgate latch system.
• Hood latch system: A micro switch will help open and close the car hood latch system.
• Heated seats: These micro-switches help turn the heating circuit on and off with the help of a switch sensor that measures temperature.
•Electric power steering: In self-driving cars, the electric power steering system uses micro switches as part of its engineering.
•Car headlight control: The micro switch in the headlight control panel is used to control the intensity and direction of the headlight.
Professional technical engineer dedicated to guide you
According to your actual needs, choose the most reasonable overall design and planning procedures