Folding Stainless Steel filter Element
Folding Stainless Steel Filter Element
Stainless steel folding filter cartridge is a full SS material filter that welded by argon arc welding. It’s mainly made by metal filter material of domestic, imported SS fiber sintered felt, nickel fiber felt, SS special mesh, SS sintered five-layer mesh and SS sintered seven-layer mesh, good heat resistance and pressure resistance performance, it’s the best choice of filtering fluid.
Material Construction
Filter medium: SS304/SS316L
Core/cage/end cap: SS304/SS316L
Key Features
◇ High temperature and high pressure resistance, chemical anticorrosion;
◇ Suitable for viscous liquid filter, long using cycle;
◇ Good air permeability, large dirt holding capacity, high strength, good sealing, long service life, can clean and renewable repeated using;
◇ Large filter area, larger dirt holding capacity, easy to clean, repeated using;
◇ Good permeability, low using pressure difference ;
Typical Application
◇ Petrochemical, oil refining, chemical production and intermediate product separation recycling;
◇ Metallurgy: filter and purified water treatment of rolling mill, continuous casting machine hydraulic system;
◇ Electrinic and pharmaceutical: the pretreatment filter of RO water and deionized water; pretreatment filter of cleaning liquid and glucose;
◇ Thermal power and nuclear power: the purification of steam system, boiler lubrication system, speed control system, bypass control system oil steam turbine and boiler lubrication system, speed control system and bypass control system oil, the purification of water pump, fan and dust removal system;
Operating Conditions
◇ Maximum working temperature: 480°C
◇ Maximum working pressure difference: 5bar
Key Specification
◇ Removal rating: 2.0, 5.0, 10, 20, 35, 60, 100 (unit: μm)
◇ Outer diameter: 65mm
BSS–□–○–☆–△
|
□ |
○ |
☆ |
|
△ |
||||||
|
No. |
Removal rating (μm) |
No. |
Length |
No. |
End caps |
No. |
O-rings material |
|||
|
020 |
2.0 |
5 |
5” |
A |
Double open end |
S |
Silicone rubber |
|||
|
050 |
5.0 |
1 |
10” |
B |
222/flat |
E |
EPDM |
|||
|
100 |
10 |
2 |
20” |
C |
226/flat |
B |
NBR |
|||
|
200 |
20 |
3 |
30” |
D |
NPT |
V |
Fluorine rubber |
|||
|
350 |
35 |
4 |
40” |
|
|
F |
Wrapped fluorine rubber |
|||
|
600 |
60 |
|
|
|
|
|
|
|||
|
100H |
100 |
|
|
|
|
|
||||
Professional technical engineer dedicated to guide you
According to your actual needs, choose the most reasonable overall design and planning procedures