Whether it is hand or mechanical waxing, to ensure that the paint evenly coated. When waxing by hand, first apply appropriate amount of car wax on the sponge (special waxing sponge) , and then reciprocate in a certain order to apply a straight line, each smear should have 1/5-1/4 of the coincidence with the smearing area on the road, prevent leakage and ensure uniform application. Mechanical waxing when the car wax on the waxing machine sponge, the specific smear process and hand-similar, it is worth noting that the edge, corner, edge of the smear should be avoided over the paint, and in this respect, manual smearing is easier to grasp. Polishing. According to the instructions of different car wax, after general smearing 5-10 minutes can be polished. When polishing, we follow the principle of waxing first to ensure that the polished meter is not contaminated, polishing is usually used non-woven cloth wool are reciprocating linear movement, appropriate pressure to remove the remaining wax.

Here are a few things to keep in mind when you’re on Your Own: 1. Waxing operation environment is clean, there is good ventilation, conditions can be set up a special waxing workshop. 2. Should be in the cool place to the car waxing, otherwise the temperature of the meter, the car wax adhesion will fall, affect the waxing effect. 3. When waxing, hand-made sponge and waxing machine sponge running line should be straight reciprocating, not ring daub, to prevent uneven coating caused by a strong ring diffuse. Four. When waxing should follow the principle of first up and then down, that is, first daub the roof, front and rear cover, body side and so on. 5. When waxing, if the sponge appears with the same color paint, paint may have been damaged, should immediately stop waxing, repair treatment. 6. Polishing work to be waxed after the completion of the specified time, and polishing movement is also linear reciprocating. Unpolished vehicles are not allowed to drive on the road, otherwise re-polished, easy to cause lacquer scratches. Seven. After polishing, to carefully check, remove the license plate, lights, doors and other residual car wax, to prevent corrosion. 8. After waxing, the equipment and supplies should be cleaned and stored properly. 9. To master the frequency of waxing, due to different driving and parking environment, waxing interval time can not be scheduled, but you can wipe the body paint by hand, if there is no sense of smoothness, it should be waxed again.