733 Acetic Super 100% Silicone Sealant
Main purposes
1.For sealing doors and windows;
2.For all the glass-related building;
3.Structure glazing
Characteristics
1.The raw material comes from Dow Corning;
2.RTV Silicone and one component; Never being soft, draw up, vulcanize under -50℃ to+100℃.
3.Acid & solidifified; high intensity; good tightness; weathering resistant; ultraviolet resistant;ozone resistant;
4.Water resistant; high and low temperature resistant.
Application
1. Various interior decoration glass, aluminum, large plate glass and sky light glass structure projects.
2. Various glass assembling and bathroom glass sealing projects.
3. Seal & cementation of al-alloy door & window, storefront, show window, diagonal and skylight corner line.
4. Good sealing performance for glass, glass fiber, pottery & porcelain and greaseless material.
Technical Data Sheet(TDS)
Technology data: The information below should only be used as a guide; it is not meant to be used for creating specifications.
733 Acetic Super 100% Silicone Sealant
Testing Standard: GB/T14683-2003 《Silicone Building Sealant》
| Item | Data |
| Type | Acetoxy |
| Density （g/cm3） | 1.0 |
| Capacity movement | ±30% |
| Skinning time | 5-10 minutes |
| Drying time(2mm/h) | 6-8 |
| Drying(4mm/h) | 10-13 |
| Max. Tensile strength | 1.5 |
| Hardness shore | 22±2 |
| Elongation at Break(%) | ≥600 |
| Modulus Mpa(100%) | 0.65 |
| Application temperature | -20℃ to +40℃ |
| Temperature resistance | -50℃ to +100℃ |
| adhesive | OK |
| Weatherproof | OK |
| Cold-hot adhesive | OK |
| Under water adhesive | OK |
| Elastic Recovery Ratio (%) | 96 |
| Mass-loss Rate (%) | 15 |
| Skin drying time and fully drying time under: 23℃ and 50% humidity | |
Limitations:The product cannot be used for projects or assembly of structures whose base material has a surface temperature higher than 40 °C.
Instruction
Storage and shelf life
1.They need to be shielded from moisture, cold, and unfavorable air quality.
Technical Data Sheet(TDS)
Technology data:The following data are only for reference purpose, not intended for use in preparing specification
731 Middle Quality Acetoxy Silicone Sealant
| Item | Data |
| Type | Acetoxy |
| Density (g/cm3) | 0.98 |
| Capacity movement | ±30% |
| skinning time | 5-15 minutes |
| Drying time(2mm/h) | 8-10 |
| Drying(4mm/h) | 18-22 |
| Max. Tensile strength | 1.3 |
| Hardness shore A | 21 Judges 2 |
| Elongation at Break(%) | =500 |
| Modulus Mpa(100%) | 0.60 |
| Application temperature | -20 C to +40 C |
| Temperature resistance | -50 C to +100 C |
| Adhesive | OK |
| weatherproof | OK |
| Cold-hot adhesive | OK |
| under water adhesive | OK |
| Elastical Recovery (%) | 96 |
| Mass-loss Rate (%) | 35 |
Limitations：The product is not applicable to structure assembly or project whose base material has a surface temperature above 40 ℃.
Professional technical engineer dedicated to guide you
According to your actual needs, choose the most reasonable overall design and planning procedures