Introduction

When a person’s eye adjustment is weakened due to age, he/she needs to correct his/her vision separately for the far and near vision. At this time, he/she often needs to wear two pairs of glasses separately, which is very inconvenient. Therefore, it is necessary to grind two different refractive powers on the same lens to become lenses in two areas. Such lenses are called bifocal lenses or bifocal glasses.

Fusion type: it is to fuse the lens material with high refractive index into the concave area on the main plate at high temperature, and the refractive index of the main plate is low. Then run in the surface of the sub-piece to make the curvature of the sub-piece surface consistent with that of the main piece. There is no sense of demarcation. Reading additional A depends on the refractive power F1 of the front surface of the far field of vision, the curvature FC of the original concave arc and the fusion ratio. The fusion ratio is a functional relationship between the refractive index of two phase fusion lens materials, where n represents the refractive index of the main glass (usually the crown glass) and ns represents the refractive index of the sub-sheet (flint glass) with a large value, then the fusion ratio k=(n-1)/(n-n), so A=(F1-FC)/k. It can be seen from the above formula that in theory, changing the front surface curvature of the main plate, the concave arc curvature and the sub-plate refractive index can change the near additional degree, but in fact, it is generally achieved by changing the sub-plate refractive index. Table 8-2 shows the refractive index of sub-sheet flint glass commonly used in the world to manufacture different near-additional fusion bifocal mirrors.